Online Catalog - Item information
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

Design Methodology of a Proton Exchange Membrane Modular Fuel Cell of 100 W Power Output

Author(s): Ebaid,Munzer S. Y. (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-10
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149771
Abstract
The design of the fuel cell plays a major role in determining their cost. It is not only the cost of materials that increases the cost of the fuel cell, but also the manufacturing techniques and the need for skilled technicians for assembling and testing the fuel cell. ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472355
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

Thermal Cycling Evaluation of Rolled Tubular Solid Oxide Fuel Cells

Author(s): Tesfai,Alem (Author) Connor,Paul (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-3
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149752
Abstract
Rolled tubular solid oxide fuel cells are manufactured in a low-cost single step firing process, so the design offers reduced production cost. All components are produced using a low cost tape casting method and are fired as a single unit. The geometry is self–supporting which removes the need for thick cell components further reducing cell cost and offering increased volumetric power densities. Here we present the results from some early studies on the influence of fast thermal cycling on performance characteristics. Thermal cycles were carried out heating and cooling at 10?°C min-1 between 400 and 800?°C. Less than 1% performance drop was calculated for the single cell and 5% drop was observed on the fourth cycle for the five cell bundle. ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472339
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

Compositional Effect of Thin Electrode Functional Layers on the Performance of Solid Oxide Fuel Cells

Author(s): Park,Hyeon-Cheol (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-6
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149754
Abstract
Anode supported solid oxide fuel cells (SOFC) were fabricated by addition of various metal oxides such as Fe2 O3 , Co3 O4 and TiO2 to thin anode functional layers between the electrolyte (yttria-stabilized zirconia, YSZ) and electrode materials (anode support: YSZ-NiO). Effect of the additives on the power density and impedance spectra of SOFC was studied. ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472340
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

Mass Transport Characteristics of Cathodes in a Phosphoric Acid Polybenzimidazole Membrane Fuel Cell

Author(s): Mamlouk,M. (Author) Scott,K. (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-15
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149755
Abstract
A study of the effect of electrode parameters on the mass transport characteristics of cathodes used for oxygen reduction in a phosphoric acid loaded polybenzimidazole membrane fuel cell is reported. Mass transport characteristics were determined using chrono-amperometry to measure the dynamic response of electrodes. Mass transfer behavior was analyzed using equations for diffusion in finite lengths of thin film electrolytes covering the catalyst surface area. ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472341
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

The Effect of Cell Temperature and Channel Geometry on the Performance of a Direct Methanol Fuel Cell

Author(s): Omran,Mojtaba Parvizi (Author) Farhadi,Mousa (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-8
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149757
Abstract
A 3D, single phase steady-state model has been developed for liquid feed direct methanol fuel cell. The model is implemented into the commercial computational fluid dynamics (CFD) software package FLUENT® v6.2, with its user-defined functions (UDFs). The continuity, momentum, and species conservation equations are coupled with electrochemical kinetics in the anode and cathode channel and MEA. For electro chemical kinetics ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472342
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

Technical and Economic Evaluation of a Formic Acid/Hydrogen Peroxide Fuel Cell System With Pt-M/C as Anode Catalyst

Author(s): Sangarunlert,W. (Author) Sukchai,S. (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-7
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149758
Abstract
Cell performance of formic acid/hydrogen peroxide (HCOOH/H2 O2 ) fuel cell, using commercial Pt-Ru/C, and prepared Pt-M/C (M?=?Ir, Mo, Co, Ag, W, Ni, Sn) bimetallic catalysts as anode catalysts are experimentally investigated and reported in this paper. Corresponding to cell performance, electrocatalytic activity of the system using commercially ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472343
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

Microstructure Optimization Designs for Anode-Supported Planar Solid Oxide Fuel Cells

Author(s): Shi,Junxiang (Author) Xue,Xingjian (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-8
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149760
Abstract
Suitable porous electrode design may play a significant role in the performance enhancement of solid oxide fuel cells (SOFCs). In this paper a genetic algorithm optimization method is employed to design electrodes based on a 2D planar SOFC model development. ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472344
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

Numerical Modeling of Planar Molten Carbonate Fuel Cells

Author(s): Mirahmadi,A. (Author) Akbari,H. (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-5
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149761
Abstract
This paper presents numerical modeling of molten carbonate fuel cells (MCFCs). The physical model consists of electrical, electrochemical, mass transport, conservation of momentums and heat transfer analyses. Numerical solution is only implemented to solution of a planer two dimensional problem comprising averaged variables. Variations of variables in the cell normal direction are taken into account by related mathematical formulas. ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472345
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

Study on Preheating Techniques for Start-up of Tubular Solid Oxide Fuel Cells

Author(s): Mirahmadi,Amin (Author) Valefi,Kia (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-7
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149762
Abstract
For start-up of tubular solid oxide fuel cells preheating concepts of gas heating, induction heating, sequential hybrid of gas and induction heating and concurrent hybrid of gas and induction heating were experimented. Due to impossibility of heating-up of porous electric conductive layers in electromagnetic field, stainless steel material was adopted for the gas distributor tube, which is readily heated by induction method and transfers heat to adjacent layers. Start-up times of 95, 31, 49 and 20 seconds were attained for gas heating, induction heating, ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472346
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

High Temperature Direct Methanol Fuel Cell Based on Phosphoric Acid PBI Membrane

Author(s): Mamlouk,M. (Author) Scott,K. (Author) Hidayati,N. (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-8
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149763
Abstract
A study of a vapor feed DMFC using PBI loaded with phosphoric acid is reported. The anode catalyst was a Pt-Ru alloy and the cathode Pt, both supported on carbon black. Performance of the fuel cell with low methanol concentrations is reported and in situ measurements of anode and cathode potentials were used to diagnose the fuel cell performance. ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472347
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

Utilization of Li-Ion Battery Assisted Fuel Cell System in Warships

Author(s): Turhan,Mahmut (Author) Abut,Nurettin (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-6
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149764
Abstract
In this study, design principles required for fuel cells to be used in systems that need inrush current are disclosed. The most important difference that separates this study from others is the consideration of utilizing Li-ion batteries to provide power where inrush current is needed in order to spread. In previous studies, lead acid batteries were used instead of Li-ion batteries ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472348
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

Effect of Dy3+ on the Microstructure and Electrical Properties of Ce0.8 Sm0.2-x Dyx O1.9 (0 = x = 0.15) Electrolytes for IT-SOFC

Author(s): Park,K. (Author) Hwang,H. K. (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-4
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149765
Abstract
High-quality nanosized Ce0.8 Sm0.2-x Dyx O1.9 (0 = x = 0.15) powders were successfully synthesized by solution combustion method. Calcined Ce0.8 Sm0.2-x Dyx O1.9 (0 = x = 0.15) powders and sintered Ce0.8 Sm0.2-x Dyx O1.9 (0 = x = 0.15) pellets crystallized in the cubic fluorite structure. Dense and nanocrystalline Ce0.8 Sm0.2-x Dyx O1.9 electrolytes were fabricated, even at low sintering temperature (1300 °C). ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472349
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

Fuel Flexibility of Anode-Supported Planar Solid Oxide Fuel Cell Evaluated With Developed Simulated-Reformate-Gas Generator

Author(s): Tanaka,Yohei (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-6
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149766
Abstract
Background: In general, solid oxide fuel cell (SOFC) systems are said to be flexible to various kind of fuels such as natural gas and petroleum gas. The fuels are reformed at a reformer and supplied to anode. Cell testing for 10 to 100 W-class SOFCs needs steady supply of a real reformate gas or a simulated reformate gas. However, it is difficult to reform heavier hydrocarbons without know-how and to evaporate small flow-rate of water. In addition, cell performance comparison with reformate gases of various fuels has been scarcely reported. Method of approach: ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472350
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

Development of Bi-Metal Anode Microtubular Supports for Solid Oxide Fuel Cells

Author(s): Suzuki,Toshio (Author) Liang,Bo (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-4
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149767
Abstract
Use of microtubular design in solid oxide fuel cells is considered to be ideal for small power application up to kW scale since it has shown to have high thermal shock resistance and high electrode area per volume, resulting in high volumetric power density. In this study, using a form of microtubular, NiO-Fe2 O3 based material has been used as an anode material and investigated the microstructure and the fuel cell performance. ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472351
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

Characterization and Development of Bio-Ethanol Solid Oxide Fuel Cell

Author(s): Imran,Syed Khalid (Author) Raza,Rizwan (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-3
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149768
Abstract
Bio-ethanol based fuel cell is an energy source with a promising future. The low temperature solid oxide fuel cell fed by direct bio-ethanol is receiving considerable attention as a clean and highly efficient for the production of both electricity and high grade waste heat. The comparison of fuel cell performance with different metal-oxide based electrodes was investigated. ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472352
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

Fabrication of Ba(Ce, Zr)0.9 Y0.1 O3-a Thin Film on a Dense Pd Substrate by Ultraviolet Metalorganic Deposition

Author(s): Asano,K. (Author) Kozawa,Y. (Author) Mugikura,Y. (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-4
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149769
Abstract
The formation of dense thin films to obtain an intermediate temperature solid oxide fuel cell (IT-SOFC) that uses Ba(Ce1-x Zrx )0.9 Y0.1 O3-a (BCZYO, x?=?0, 0.3, 1) as the proton conductor was attempted on a dense Pd substrate at low sintering temperatures by the metalorganic deposition (MOD) method. A BaCe0.9 Y0.1 O3-a (BCYO) thin film (thickness 0.8 µm) was prepared by MOD and then annealed at 850°C on a Pd substrate with low heat resistance. ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472353
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

Parallel Manifold Effects on the Heat and Mass Transfer Characteristics of Metal-Supported Solid Oxide Fuel Cell Stacks

Author(s): Park,Joonguen (Author) Bae,Joongmyeon (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-8
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149770
Abstract
The metal-supported solid oxide fuel cell (SOFC) was introduced as a new fuel cell design because it provides high mechanical strength and blocks gas leakage. Ordinary SOFCs should be manufactured in a stack because a single cell does not have sufficient capacity for a commercial system. In a stack, heat and mass transfer, which affects the performance, is altered by manifold structures. Therefore, this paper studied three kinds of manifold designs using numerical analyses. Governing equations and electrochemical reaction models ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472354
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

Simultaneous Turbine Speed Regulation and Fuel Cell Airflow Tracking of a SOFC/GT Hybrid Plant With the Use of Airflow Bypass Valves

Author(s): Tsai,Alex (Author) Tucker,David (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-10
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149772
Abstract
This paper studies a novel control methodology aimed at regulating and tracking turbo machinery synchronous speed and fuel cell mass flow rate of a SOFC/GT hardware simulation facility with the sole use of airflow bypass valves. The hybrid facility under consideration consists of a 120 kW auxiliary power unit gas turbine coupled to a 300 kW SOFC hardware simulator. The hybrid simulator allows testing of a wide variety of fuel cell models under ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472356
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

The Use of a High Temperature Wind Tunnel for MT-SOFC Testing—Part II: Use of Computational Fluid Dynamics Software in Order to Study Previous Measurements

Author(s): Lawlor,V. (Author) Hochenauer,C. (Author) Griesser,S. (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-12
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149773
Abstract
Micro-tubular solid oxide fuel cells (MT-SOFCs) are a much smaller version of larger tubular SOFCs. They are operational within seconds and allow a higher power density per volume than the larger version. Hence they are a potential technology for automotive, auxiliary and small scale power supply devices. In this study a commercially available computational fluid dynamic (CFD) software program was used to predict a MT-SOFCs performance when located inside a high temperature wind tunnel experimental apparatus. In Part I, experimentally measured temperature profiles were recorded via thermo-graphic analyses and I/V curves. ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472357
Online Catalog - Item information
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

Performance Evaluation of Solid Oxide Fuel Cell Engines Integrated With Single/Dual-Spool Turbochargers

Author(s): Oh,So-Ryeok (Author) Sun,Jing (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-12
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149774
Abstract
This study investigates the performance and operating characteristics of 5kW-class solid oxide fuel cell and gas turbine (SOFC/GT) hybrid systems for two different configurations, namely single- and dual- spool gas turbines. Both single and dual spool turbo-chargers are widely used in the gas turbine industry. Even though their operation is based on the same physical principles, their performance characteristics and operation parameters vary considerably ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472358
Philadelphia   University
Library & Information Resources 

Technical   Services   Department
Online Catalog - Item Information
Date:02/05/24

 

Publication type: Article
Title:

Systems Modeling of Chemical Hydride Hydrogen Storage Materials for Fuel Cell Applications

Author(s): Brooks,Kriston (Author) Devarakonda,Maruthi (Author)
Source Journal Info. Title:Journal of Fuel Cell Science and Technology
Issue Number:2011/DEC V.8 N.6
Call No.:621.31242905 J F C
Location: References & Periodical Hall - 2nd floor
Physical Description: p 1-6
Subject Area: Engineering
Subject Terms:  Fuel cells 
Accession Number 149775
Abstract
A fixed bed reactor was designed, modeled and simulated for hydrogen storage on-board the vehicle for PEM fuel cell applications. Ammonia borane was selected by DOE’s Hydrogen Storage Engineering Center of Excellence as the initial chemical hydride of study because of its high hydrogen storage capacity (up to ~16% by weight for the release of ~2.5 molar equivalents of hydrogen gas) and its stability under typical ambient conditions. ...

Abstract URL:http://electrochemical.asmedigitalcollection.asme.org/article.aspx?articleID=1472359

For more info. :  Tel: +962-6-4799000  Technical   Services Department Ext.2377   Email: Library@philadelphia.edu.jo